奥氏体

na.【冶】austenite

网络释义：Austenitic; induced austenite; Cr-Ni

网络释义

na.1.【冶】austenite

1.austenite 1,铁素体( ferrite) 2,奥氏体( Austenite ) 3,渗碳体( Cementite) ...

2.Austenitic Welding drawing tube, 焊接拉拔管， Austenitic, 奥氏体， ferritic 铁素体， ...

3.induced austenite碳D 锰 磷 硫 硅 铬 氮 铜 其它元素 EF 奥氏体（Cr-Ni）(Cr-Mn-Ni) N08020 N08367 N08800 … … 800G 0.07 0.030 0.10 2.00 …

5.γ-Fe 肥粒铁（ α-Fe, δ-Fe） 奥氏体（ γ-Fe） 碳化三铁（ Fe3C） ...

6.austenite austenitic ... 安装图 erection drawing 奥氏体 austenite austenitic 安全系数 safety factor/coefficient ...

7.q austenite ... }" q Y2 N,r aqueous leach 水溶液浸出" 6 L+ B% v& F7 q9 o6 q austenite 奥氏体) 1 2 3 mill 十二辊轧机 ...

8.austeniticbainitic nodular cast iron ... RE nodular cast iron 稀土球墨铸铁 austeniticbainitic nodular cast iron 奥氏体 ...

1.Weldability is one of the important properties that will be affected the application of high nitrogen austenitic stainless steel.焊接性是影响高氮奥氏体不锈钢（高氮钢）应用的一个重要因素。

2.The change in austenite grain size of a steel with low sensitivity to weld crack was investigated via high-temperature quenching test.通过高温淬火试验观察试验钢奥氏体晶粒尺寸的变化情况。

3.The equilibrium solubility of AlN in austenite at different temperatures and its isothermal precipitation have been studied.我们已经研究过在不同温度的奥氏体氮化铝的溶解度以及等温过程的沉淀物。

4.The establishment of the relationship would provide us a new judging rule used in researching creep damage of austenite steel from the . . .这一关系的确立，为从微观角度研究奥氏体钢的蠕变损伤提供了一种判断依据。

5.The microstructure and mechanical properties of two high manganese austenite steels during tensile tests at room temperature were studied.研究了两种不同锰含量的高锰奥氏体钢在室温拉伸变形过程中力学性能和组织的变化。

6.The surface reaction of water atomized 304L austenitic stainless steel powder during sintering has been studied.研究了水雾化奥氏体不锈钢粉末在致密时的表面化学反应。

7.The behavior of Nb and N in medium manganese steel and their effects on microstructure and properties of the steel have been studied.阐述了铌、氮在中锰奥氏体钢中的作用及其对中锰钢组织和性能的影响。

8.As the result of strengthening of the matrix of nickel austenite nodular iron, not only . . .镍奥氏体球墨铸铁的基体得到强化不仅使其耐蚀性能稳定，而且综合性能也得到提高。

9.The inheritance and aberrance of the mixed original austenite grains are significantly affected by the following temperature parameters.后续的温度工艺参数只是影响原始奥氏体混晶的遗传或变异。

10.Spheroidal austenite and acicular austenite can be seen during the austenitizing courses at low speed.慢速加热奥氏体化过程中，观察到球状奥氏体和针状奥氏体。