baud是什么意思_baud的翻译_读音_造句_例句

baud

美式发音: [bɔd] 英式发音: [bɔːd]

n.波特(信号、信息传输速率单位)

网络释义:波特率;可配置波特率;波特率来表示

复数:bauds  

网络释义

baudn.

1.波特(信号、信息传输速率单位)a unit for measuring the speed at which electronic signals and information are sent from one computer to another

n.1.波特2.计算机的秒速

n.1.a unit for measuring the speed at which information is sent to or from a computer

1.波特 portNo: 串口号 baud: 波特率 parity: 奇偶校验 ...

3.可配置波特率 PCF_TOTALTIMEOUTS 支持总(占用时间)超时 SP_BAUD 可配置波特率 SP_DATABITS 可配置数据 …

4.波特率来表示 battle formation 战斗队形 baud (讯号速度单位元) bay 舱;隔间 ...

6.波特率选择择(INNP)、通讯数据格式选择(DATA)、通讯波特率选择BAUD)和本机通讯地址设置(ADDR)共10 项设置菜单项目…

7.鲍率串行通信接口SCI之前,应对其进行初始化,主要包括波特率寄存器BAUD)、串行通信数据寄存器(SCDR)、串行通信 …

造句带翻译释义:,波特,波特率,可配置波特率,波特率来表示

1.It was at this point that the difference between baud and bit per second became real.在这里波特和位每秒的区别得以实现becamereal。

2.The baud rate might not be equal to the bit rate, as a symbol might have more than two states.波特率与比特率可能并不相同,因为一个符号可能包含两个以上的状态。

3.In microcontroller serial port communication, the system require that the baud rate of dispatcher and sink should keep consistent.在单片机串行通信中,要求发送和接收的波特率保持一致。

4.The baud rate of a data communications SYSTEM is the NUMBER of symbols per second transferred.通讯系统的波特率是每秒传输信息标记(symbols)数。

5.You should consider either increasing the baud rate used for performing the installation, or performing a Text Mode installation.您要么通过提高波特率提升安装效率,要么使用文本模式安装。

6.The phone line , we're able to use it at a higher speed today, so- called 9600 baud, but that still isn't good enough .电话排成一行,我们能够今天以比较高的速度使用它,所谓的9600鲍,要不是剧照是不够好的。

7.Baud: Number of computer bits transmitted per second over a data communications channel .波德:在一个数据通信通道中,每秒种所传送的数元量。

8.In the case of the UART, there's not a lot to configure apart from the baud rate and framing details.对于UART来说,除了波特率和帧细节外没有太多属性要配置。

9.Those who were not at least in the lower-middle class, however, had to dink around a 14. 4 modem, or worse: 2400 baud.这些人都不是中低产阶级,然而,却不得不使用大约14.4调制解调器,或者更差的2400波特。

10.The baud rate specified is less than or equal to zero, or is greater than the maximum allowable baud rate for the device.指定的波特率小于或等于零,或者大于设备所允许的最大波特率。

1/3    1 2 3