内应力

na.residual stress

网络释义：internal stress; Stress; inner stress

网络释义

na.1.【力】internal stress; residual stress; locked-up stress

1.internal stress 5 孔隙率 porosity 6 内应力 internal stress 7 电导仪 conductivity gauge ...

2.Stress Stocker 仓储 Stress 内应力 STRIP: 一种湿法刻蚀方式 ...

3.inner stresss)、热应力 (thermal stress) 及内应力 (intrinsic stress)，其中，外应力是由外力作用施加于薄 膜所引起的。

5.interior stress ... interior load stress 中载应力 interior stress {n.}内应力 intermediate principal stress 中间主应力,第二主应力 ...

6.Residual stress ... RRecrystallization 再结晶，重结晶 Residual stress 内应力，残余应力 Rupture 断裂，裂开 ...

7.body stress ... body-sodium activation 体内钠活化 body stress 内应力，体应力 body swivel bearing 球形止推轴承 ...

1.As the yarn is twisted, internal forces are built up in the direction of the twist.当纱线被加捻的时候，在捻度的方向上也会相应地形成内应力。

2.Thus, the products are easy to suffer from short molding, scorching, excessive internal stress other defects.容易造成制品打不满，烧焦、内应力大等各种缺陷。

3.Because nano-beam is sensitive to the intrinsic stress in the structure, it is always made of single-crystalline materials.由于纳米梁对结构中的内应力非常敏感，所以一般采用单晶材料制作。

4.Annealing also relieves internal stresses previously set up in the metal.退火也释放了先前在金属中的内应力。

5.Composition design play important action to improve inside stress and spread state of grinding balls, and obtains much more better effect.成分设计对减少和改善内应力及其分布具有较大作用，它可促使磨球改性处理得到更佳效果。

6.The stress variation in the center is just opposite, and a structural type internal stress state is formed after quenching.心部的应力变化正好相反，最终形成了组织应力型的内应力分布。

7.That the internal stress is released strongly by heat treatment results in a decrease of the magnetic-field-induced strain.热处理后，内应力大大降低，导致磁感牛应变降低。

8.This method depends on determining the change in stress distribution within the model when it is turned upside down.倒置法的依据是在模型倒置时测定模型内应力分布的变化。

9.meanwhile, cracking happened at the presence of chemical reagent and residual internal stress due to the low chemical resistance of PC.同时PC耐化学性能较弱，在化学试剂和内应力的共同作用下最后发生了开裂。

10.This thesis suggests that it is essential to eliminate all the inner force of the texture to ensure the stability of the cotton texture.降低棉织物在加工后的缩水率，使棉织物有良好的尺寸稳定性，消除织物的所有内应力十分必要。