榫头

na.tenon; rabbet

网络释义：Locomotor Mortis; cog; sún-thâu

网络释义

na.1.rabbet; tenon

1.tenon marble coat 大理石层 tenon 榫头 Method of Painting 油漆办法 ...

2.rabbet 榫舌；公榫 tongue 榫头；榫口 rabbet 榫销接合 tenon dowel joint ...

3.Locomotor Mortis Alohomora 阿咯哈呣啦 Locomotor Mortis 榫头──失准 Petrificus Totalus 整整── …

4.cog ... 余函数 cofunction 齿，嵌齿，榫，榫头 cog 汽电共生 cogeneration ...

5.sún-thâu 线头 suànn-thâu 榫头 sún-thâu 踏话头 ta̍h-uē-thâu ...

6.tenon m. 榫槽 mortaise f. 榫头 tenon m. 塌落度 valeur f. du slump-test ...

7.súuntâu qāntâu【 空头】： súuntâu【 榫头】： sentâu【 先头】： ...

1.6-Begin laying out a tenon by marking a shoulder line on all four sides of the board. Use a square and a sharp pencil.图6。给榫头划线的时候，先在木料的四周画好肩线，使用直角尺和削尖的铅笔划线。

2.13-Use a square and a marking gauge to lay out the mortise. Double-check that the mortise and tenon widths match.图13。用直角尺和划线器画出榫槽线。再次检查，确保榫头和榫槽的宽度契合。

3.Furthermore, it is not sensitive to the machining error and the change of the assembly state, and has robust characteristic.此外圆弧型榫齿型面的榫头对加工偏差、安装状态变化不敏感，具有鲁棒性特征。

4.The wooden posts, the two-inch tongue and groove floorboards, the bolts, cladding, screws are all named and numbered.木头柱子、两英寸的榫头和企口板、螺钉、外墙板、螺丝都已命名并编号。

5.When lights fuse, furniture gets rickety , pipes get clogged, or vacuum cleaners fail to operate.每当电灯保险丝烧断、家具榫头松动、管道堵塞、吸尘器不动时。

6.You can't fit a square peg into a round hole.方榫头插不进圆卯眼。？圆凿方枘不合适。

7.two adjacent column components are spliced together by the rabbets and the slots.相邻两柱体构件通过榫头和凹槽结构拼接。

8.The tenon should be snug in the mortise, but you shouldn't have to force the parts together.榫头应该能正好插进榫孔中，而不需要用太大的力量。

9.You have to try to handle the different rates at which the wood dries, so the joints get tight and durable.你得处理好木料干燥后引起的不同的收缩率，以保证榫头紧固不松。

10.All excess glue around dowels, joints, etc. will be wiped clean.榫头及接合处过量多余的胶人擦拭干净。