1.Thickness of Top Silicon Film - The distance found between the face of the top silicon film and the surface of the oxide layer.顶部硅膜厚度-顶部硅层表面和氧化层表面间的距离。

2.It seems to be helpful to osseointegration if it can effectively keep the oxidation in nanoporous and increase oxide thickness.若能有效增加氧化层厚度与降低植体表面孔径尺寸将对骨整合会有所助益。

3.If it has a good conservation, and no polish, the blade should be covered with an oxidation layer, and beautiful pattern.如果保存形态好，没有打磨，则剑身应泛淡淡的氧化层，同时也可以让我们一窥美丽的花纹。

4.Magnetic metal layers separated by a perfect nano-oxide layer formed when over the critical thickness have no direct interaction.阻大于临界厚度时，形成完整的氧化层，被氧化物隔开的磁性金属层之间没有直接的耦合作用。

5.The best working parameters have to be found in order to obtain a very low carbon concentration without a thick oxide layer .最佳工作参数，必须找到，以便获得非常低的碳浓度不厚氧化层。

6.Moreover, the heating of iron or steel to a high temperature causes oxidation, and a film of oxide is formed on the heated surfaces.此外，钢件或铁件加热到高温，就会引起氧化，因而在加热表面上会形成氧化层。

7.Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxide coatings to artificial light.铝和铝合金的阳极处理.彩色氧化层耐人造光的加速试验

8.The process of anodizing involves the deposition of further oxide on the surface .阳极电镀的工序就是在表面进一步附着氧化层。

9.and a spacer on a side of the gate oxide layer pattern, the metal nitride layer pattern, and the silicide.以及在该栅极氧化层图案、该金属氮化层图案和该硅化物的侧面上的间隔物。

10.And in these temperatures the oxidation of the two kinds of steel did not peel off the layer.并且在这些温度下以上两种钢在氧化过程中没有出现氧化层剥落的情况。